Mexico Continues to be Top Choice for Manufacturing 'Near-Shoring,' Says AlixPartners Study - aftermarketNews

Mexico Continues to be Top Choice for Manufacturing ‘Near-Shoring,’ Says AlixPartners Study

AlixPartners said results from the survey also suggest that rising domestic demand in developing countries such as China may encourage even more near-shoring and "re-shoring" in the West in the future.

NEW YORK – Reflecting continued rising labor and other manufacturing costs for imports from faraway places like China, "near-shoring" continues to be seen as an opportunity to serve U.S. demand, according to roughly half of the C-level and other senior executives of manufacturing-oriented companies who were surveyed by AlixPartners.
 
While 35 percent of that number view manufacturing inside the U.S. as the most attractive choice for such re-sourcing (up from 21 percent in a similar survey a year ago), 50 percent view last year’s top choice, Mexico, as the No. 1 choice again this year, the global business advisory firm said.
 
AlixPartners said results from the survey also suggest that rising domestic demand in developing countries such as China may encourage even more near-shoring and "re-shoring" in the West in the future, as companies in China and other developing markets redirect their capacity toward local consumption rather than export. More than a third of the executives surveyed – 34 percent – predicted that would be the case.
 
"A lot has been written of late about America’s manufacturing rebound, and there certainly has been a very impressive rebound; however, Mexico still remains the near-shoring locale of choice for companies looking to overcome the higher costs of doing business today in places like China," said Foster Finley, managing director at AlixPartners and co-lead of the firm’s Transportation Practice. "As manufacturing costs have increased in China and elsewhere in Asia, the cost and time factors involved in shipping goods across vast distances are magnified and, whether it’s in Mexico or the U.S., any company that’s not at least considering alternative manufacturing sources closer to their home market is certainly missing an opportunity."
 
As in last year’s survey, lower freight costs and improved speed-to-market were the two most-cited advantages expected from the decision to near-shore. Thirty-seven percent of executives cited hoped-for lower freight costs, up from 34 percent in the 2011 survey, and 31 percent pointed to speed-to-market, up from 28 percent a year ago.  Significantly, and perhaps hand-in-hand with both of those, 26 percent cited lower inventory costs as the biggest expected advantage, up from 20 percent last year, the firm notes.
 
"While total cost parity certainly doesn’t exist today, the gap between manufacturing in North America and in places like China has narrowed dramatically, especially when shipping and inventory carrying costs are factored into the equation," said Russ Dillion, a director at AlixPartners. "Company leaders, at an increasing rate, are realizing that customers don’t have the patience to wait three to four weeks for their products to cross the ocean. Today’s speed of business usually won’t allow for that."
 
The outlook for the security and safety situation in Mexico, an important factor in any decision to relocate manufacturing there, was essentially unchanged in this year’s survey. About half of those surveyed each year — 45 percent last year and 43 percent this year – said they expect modest improvement in the security and safety situation, while 13 percent said they think it will "worsen somewhat," vs. 14 percent in last year’s survey.  Only 4 percent predicted the situation will be "spiraling out of control," down from 7 percent who thought that a year.
 
"While security and safety should remain an issue for any company doing business in Mexico, the perception of the situation today is generally better than it was a couple of years ago," said Chas Spence, a director at AlixPartners. "As with doing business in Brazil or, for that matter, parts of Asia, caution should always be top of mind; but on the other hand, with the aid of the right kinds of advisers many companies today are employing Mexico as an attractive alternative source of production."
 
The AlixPartners survey also asked senior executives in this election year about the U.S. government’s role in promoting the re-shoring of manufacturing jobs to America. While a majority said there are useful actions the government can take (including cutting corporate tax rates), a sizeable number – 31 percent – said there is nothing at all the government can do, and only 3 percent say that lower health care costs – a big part of this year’s political debate – would lead to more re-shoring.
 
About the Study
The AlixPartners Manufacturing Re-shoring and Near-shoring Outlook Survey was conducted March 7 to April 27, and included responses from 116 C-level and other senior executives in manufacturing-oriented companies that sell into the U.S. market. Respondents were from a broad range of middle-market (at least $100 million in annual revenues) and large companies, in a broad range of industries, including automotive, aviation, consumer products, durable goods and packaging.
 
For more information, go to http://www.alixpartners.com/.
 
 

You May Also Like

New 17-ton Rotary Pit Lift Released in Europe, Middle East, Africa

The lift can adjust to fit different pit sizes, while maintaining the ability to pick up, lift and support heavy-duty vehicles.

Rotary-pit-lift-600

Vehicle Service Group (VSG), part of Dover, announced the launch of the Portal Lift 17 Vario, a new suspended pit lift under the Rotary brand in the EMEA (Europe, the Middle East and Africa) region. The Portal Lift 17 Vario joins Rotary’s Blitz Series and has been engineered for heavy-duty use, with a capacity of 17 tons, according to the company.

Standard Motor Products Introduces 268 New Numbers

The release provides new coverage in 75 product categories and 80 part numbers for 2023 and 2024 model-year vehicles, SMP said.

MAHLE Releases 2023 Sustainability Report

MAHLE noted it made significant progress in reducing its CO2 emissions, and increasing the use of renewable electricity.

MAHLE Releases 2023 Sustainability Report
Transtar Industries Continues Rapid Product Line Expansion 

The company is now offering OE recycled engines, in addition to its expansive line of OE recycled transmissions and transfer cases.

ZF Cleans Up Metro Park for Earth Day

ZF said the effort was in line with its dedication to sustainability, zero-waste and circularity.

ZF Cleans up Metro Park

Other Posts

TRP Celebrates 30 Years of Aftermarket Parts

Thirty years and 300-plus stores later, TRP looks back at what led to the milestone.

TRP-30th-Anniversary-Logo-1400
New Sanctions on Russian Nickel, Copper and Aluminum

Reisman discusses how the sanctions will impact prices paid by those in the automotive industry.

PRT Launches 30 New Complete Strut Assemblies

The new items represent more than 10 million vehicles in new coverage, PRT said.

Marelli, Infineon Collaborate on Electronic Zone Control Unit 

Marelli will showcase its latest zone control unit (Zone), built in collaboration with Infineon, at the upcoming Auto China show in Beijing.

Marelli and Infineon Collaborate to Showcase Zone Control Unit