Petty's Garage Begins Work On ­Grand Prize In 2018 ‘Drive With The Original’ Technician Promotion

Petty’s Garage Begins Work On ­Grand Prize In 2018 ‘Drive With The Original’ Technician Promotion

The custom, resto-mod 1968 Chevrolet Camaro RS will be finished and tested in time to be awarded to the winner by MAHLE Aftermarket at AAPEX this fall in Las Vegas.

At Petty’s Garage work has commenced building the grand prize for the 2018 MAHLE “Drive with the Original” Technician Promotion –­ a custom, resto-mod 1968 Chevrolet Camaro RS. The one-of-a-kind vehicle will be finished and tested in time to be awarded to the winner by MAHLE Aftermarket Inc. at AAPEX, taking place from October 30 to Nov. 1 in Las Vegas.

“Last year’s MAHLE Mustang was a huge hit at AAPEX and we wanted to do something that would surpass even that,” said Jon Douglas, general manager, MAHLE Aftermarket North America. “The MAHLE Camaro RS will be a real showcase for MAHLE Original gaskets, filters and other MAHLE parts. One lucky technician is going to be very happy!”

The “Drive with the Original” promotion runs through Oct. 1. Four finalists will be randomly selected from all entries to receive a trip for two to AAPEX in Las Vegas. The “Original,” Richard Petty, will be present when the finalists each select a key from The King’s signature Charlie One Horse hat –­ one of which will start the grand prize MAHLE Camaro RS from Petty’s Garage.

Petty’s Garage found the rare Camaro with Rally Sport option sitting in a field in Martinsville, Virginia, less than 100 miles from the company’s Level Cross, North Carolina, headquarters. They will replace the original 327-cubic-inch engine with a high-performance LS7 427-cubic-inch motor with all MAHLE components, including MAHLE pistons and rings, MAHLE Original gaskets and filters and Clevite bearings. The engine, expected to put out 625 horsepower, will be mated to a Tremec T5 5-speed transmission and deliver the power to the road through a narrowed rear axle housing with 12-bolt differential.

The chassis will ride on a Ridetech suspension, equipped with Forgeline 20-inch, three-piece forged wheels, shod with Continental ExtremeContact Sport Tires. Wilwood 6-piston front and 4-piston rear disc brakes will provide impressive stopping power.

Finishing off the package, the interior will feature Dakota Digital upgraded digital gauges that fit the original dash, complimented with black leather bucket seats with MAHLE blue stitching with the Petty’s Garage and MAHLE logos embroidered into the seatbacks and headrests.

The exterior of the Petty’s Garage MAHLE Camaro will feature custom bodywork, including flush-mounted windows with removed trim and drip rails; trimmed and fitted front and rear bumpers; and a custom carbon fiber front splitter and rear spoiler. The package will be finished off with custom BASF R-M Finish MAHLE blue paint with painted white graphics.

In addition to the grand prize, more than 1,000 additional instant prizes will be awarded, including Richard Petty Driving Experiences, autographed Richard Petty signature Charlie One Horse cowboy hats and autographed No. 43 die-cast model cars.

Information on entering the “Drive With The Original” Promotion is available on specially marked MAHLE Original gasket boxes. Complete information about the “Drive with the Original” promotion, including official rules, terms and conditions, can be found at drivewiththeoriginal.com.

For more information about MAHLE Aftermarket and its brands, visit mahle-aftermarket.com or contact a local sales representative.

You May Also Like

TBC Corporation Appoints New President and CEO 

Don Byrd, currently TBC’s chief strategy and marketing officer, assumes his new role effective May 1.

TBC Corporation (TBC) announced the appointment of the company’s new president and chief executive officer, Don Byrd. Byrd, who currently serves as TBC’s chief strategy and marketing officer, will replace Sam Kato, effective May 1.

Kato, who was appointed to position TBC for growth and evolution, will return to Sumitomo, one of TBC’s shareholders. 

Rotating Electrical: Revolving and Evolving

Higher compression ratios, increased accessory electrical loads, and the move toward hybridization and emissions compliance have brought many changes to the design and requirements of these rotating electrical components.

Rotating Electrical: Revolving and Evolving
The Purge: Flushing & Filling the Coolant

This job isn’t needed as often as it used to be, but it’s still important.

The Purge Flushing & Filling the Coolant
JNPSoft OptiCat Unveils DataLive Product Tracking Tool

With DataLive, manufacturers can now automatically track when their products reach a go live state on the various distribution sell platforms.  

Opticat
BendPak Announces Longer-Lasting LITESTIX Work Light

A larger battery keeps the rechargeable hands-free light shining bright for up to 7 hours, BendPak said.

BendPak Announces Longer-Lasting LITESTIX Work Light

Other Posts

New 17-ton Rotary Pit Lift Released in Europe, Middle East, Africa

The lift can adjust to fit different pit sizes, while maintaining the ability to pick up, lift and support heavy-duty vehicles.

Rotary-pit-lift-600
BCA Bearings Announces 2024 ‘Endless Summer’ Promotion

BCA’s warehouse distributor customers can earn BCA-branded, premium merchandise with orders of BCA wheel hub assemblies, bearings and seals.

The Impact of Trade and Tariffs on the Aftermarket

While there are numerous components that make up “landed costs,” duties, taxes and tariffs are a huge factor and can often be a detriment to global trade, says Thomas Cook, managing director at Blue Tiger International.

ASE President Releases April Message

New ASE Chairman Tom Trisdale says 2024 is a year of action for ASE as the challenges of repairing vehicles and the pressures facing technicians have never been greater.

ASE President Tom Trisdale message to the industry