Aeromotive Announces New Gen II Stealth Fuel Tank

Aeromotive Announces New Gen II Stealth Fuel Tank

The 17-gallon fuel tank includes an installation kit that provides a complete tank-swap solution, the company says.

Aeromotive announces its Aeromotive Gen II Stealth Fuel Tank lineup which it says is designed specifically for the popular 1967-’72 Chevrolet C10 truck. The rear-mount configuration allows builders to easily replace the in-cab fuel tank with a 17-gallon tank positioned behind the rear axle and between the frame rails, the company says.

The tanks tanks are “perfect for LS-type swaps and carbureted setups,” Aeromotive says. The Gen II Stealth Tank comes fully assembled in painted steel, along with Aeromotive’s patented foam and basket assembly to control fuel slosh. Also included is a 0-90 ohm fuel level sender and an outlet cap with a -06 ORB outlet and return port.   

The 1967-72 Chevrolet C10 tank installation kit provides a complete relocation solution, that includes a bed-mount fuel filler cap assembly, frame rail/filler neck locator drill guides, tank straps, and all mounting hardware, Aeromotive says.

The new tanks are available with three Aeromotive fuel pump options: 200 LPH (#18110), 340 LPH (#18410), and 450 LPH (#18810). The pumps can support up to approximately 800 FWHP when used in conjunction with a gas/EFI/forced induction combination, or a maximum of approximately 550 FWHP in an E-85/EFI/forced induction combination. 

For more information, visit Aeromotiveinc.com and Pertronixbrands.com

You May Also Like

Dana Expands Line of Spicer ReadyPack Kits

Dana added new part numbers to its line of Spicer ReadyPack preassembled kits for commercial-vehicle driveshafts, coupling shafts and interaxle shafts.

Dana Expands Line of Spicer ReadyPack Kits

Dana Incorporated has added new part numbers to its line of Spicer ReadyPack preassembled kits for commercial-vehicle driveshafts, coupling shafts, and interaxle shafts. The new SKUs, combined with the original 13 SKUs, now provide driveshaft builders a kit solution for all commercial-vehicle drivelines, the company said.

“Spicer ReadyPack kits were very well received by Dana customers when first introduced, so we are pleased to announce that we have tripled our offerings, now providing full kit coverage for Dana drivelines,” said Bill Nunnery, senior director, sales and marketing, global aftermarket for Dana. “The Spicer ReadyPack line now includes service-free, SPL Lite coupling shaft, and new Spicer and SPL series options.  These time-saving kits offer convenience and streamlined ordering, as well as savings on inventory and labor costs.”

Bendix Marks One Year of Accident-Free Operations

Five hundred people work at the company’s Huntington, Indiana, campus, where 365 days have gone by without a recordable injury, according to Bendix.

Bendix Marks One Year of Accident-Free Operations
Bosch Releases 87 New Part Numbers in June

Bosch’s new part numbers cover 318 million vehicles in operation across North America.

Schaeffler Showcases Hydrogen Electrolyzers and Fuel Cells

Schaeffler also is demonstrating its progress toward the commercialization of green hydrogen, at the Hydrogen Americas 2024 Summit and Exhibition in Washington, D.C. 

Schaeffler Showcases Hydrogen Electrolyzers and Fuel Cells
Transtar Holding Company Acquires PPi Automotive

PPi Automotive is a family-owned and operated automotive parts wholesale distributor based in Pittsburgh.

Transtar acquires PPi Automotive

Other Posts

Akebono Releases ProACT and Severe Duty Kits

Nine new part numbers provide more than 4M VIO, adding late-model coverage for Chevrolet, Dodge, Ford, GMC, Lincoln and Ram, Akebono said.

Akebono-Releases-ProACT-and-Severe-Duty-Kits
Schaeffler Releases TorCon 6L80 Torque Converter

The LuK TorCon 6L80 is “the only all-new, never remanufactured torque converter available in the independent aftermarket,” Schaeffler said.

Schaeffler Announces Release of TorCon 6L80
Bendix Marks Opening of Manufacturing Facility in Mexico

The 185,000-square-foot plant will use highly automated manufacturing processes to produce two technologies: Global Scalable Brake Control and Global Scalable Air Treatment.

Bendix Marks Opening of Advanced Manufacturing Facility in Mexico
Standard Motor Products Introduces 200 New Numbers

The release provides new coverage in 60 distinct product categories and 75 part numbers for 2023 and 2024 model-year vehicles.

Standard Motor Products Introduces 200 New Numbers