Takata Agrees To Expansion Of Recalls To Cover All Non-Desiccated Frontal Airbag Inflators In US

Takata Agrees To Expansion Of Recalls To Cover All Non-Desiccated Frontal Airbag Inflators In US

Takata estimates that there will be approximately 35-40 million airbag inflators covered by these new recall notices, primarily for passenger-side inflators.

takata-airbag-recallTakata Corp. has agreed to initiate future expanded recalls covering all non-desiccated frontal airbag inflators containing phase-stabilized ammonium nitrate (PSAN) in the United States that were not covered by previous recalls. The details of Takata’s action are set out in an amendment to the Nov. 3, 2015, Consent Order with the National Highway Traffic Safety Administration (NHTSA).

Takata stated it is not aware of any ruptures, in the field or in testing, in the inflator products in vehicles that would be covered by this new order, nor is Takata aware of any new data or scientific analysis that suggests any substantial risk with respect to such vehicles. Despite this, the company agreed to accept and support the expanded recalls. Takata stated that all vehicles in which field or testing ruptures have occurred are already subject to previous recalls in the U.S.

As noted in the Consent Order amendment, research and analysis by several independent engineering organizations has supported Takata’s previously reported findings that certain inflator ruptures are caused by a combination of long-term exposure to high heat, absolute humidity and temperature cycling. With these expanded recalls, all non-desiccated frontal inflators will be under recall in the U.S. The vast majority of the frontal inflators Takata produces today contain desiccant, a drying agent that acts as a mitigant against these environmental effects. Manufacturing variability also could pay a role in the inflator failures, Takata noted, as certain vehicle models have been shown to have a much higher incident rate than others.

Shigehisa Takada, chairman and CEO of Takata, said, “This agreement with NHTSA is consistent with our desire to work with regulators and our automaker customers to develop long-term, orderly solutions to these important safety issues, and we are gratified that the NHTSA Administrator has recognized the company’s cooperation. Our actions, including the expansion of product recalls to cover all non-desiccated frontal inflator models, demonstrate our total commitment to safety and our intention to be part of the solution and to restore the confidence of the driving public.”

Takada continued: “We will continue to dedicate significant resources to maximize recall completion rates, including through our ‘Get the Word Out’ campaign and by working closely with NHTSA and our automaker customers on new and innovative solutions to reach consumers. Takata is committed to supporting all actions that advance vehicle safety.”

Based on the terms of the Consent Order amendment, Takata will be filing Defect Information Reports (DIRs) for all non-desiccated frontal airbag inflators not currently under recall in five stages, according to model years and the geographic regions where the vehicles are registered, focusing first on older vehicles in regions of high heat and absolute humidity. All non-desiccated frontal passenger PSAN inflators will be under recall by Dec. 31, 2019. Takata estimates that there will be approximately 35-40 million airbag inflators covered by these new DIRs, primarily passenger-side inflators. Almost all driver-side non-desiccated frontal airbag inflators are already under recall. The first DIR, which will be filed on May 16, 2016, will cover approximately 14 million inflators. The expanded recalls also include certain non-desiccated frontal airbag inflators, which have been provided as replacement parts in the past.

Takata has been in close consultation with NHTSA regarding the severe challenges it will face in supplying replacement parts for the expanded recalls. It has been determined that such issues will be further discussed and resolved through the Coordinated Remedy Program together with NHTSA and the vehicle manufacturers. Takata will continue to offer its best effort and cooperation towards the smooth implementation of the expanded recalls.

To date, Takata has produced more than 14 million airbag replacement kits in North America alone, significantly more than the approximately 8 million inflators that have been returned to Takata as part of current U.S. safety campaigns. Takata strongly urges all consumers to check NHTSA’S safercar.gov website regularly and contact their dealers immediately if their vehicle is subject to a recall.

You May Also Like

PHINIA Reports Q1 2024 Results

U.S. GAAP net sales were $863 million, an increase of 3.4% compared with Q1 2023, according to PHINIA.

PHINIA Inc. reported results for the first quarter ended March 31, 2024.

First Quarter Highlights:

U.S. GAAP net sales of $863 million, an increase of 3.4% compared with Q1 2023.

Excluding $17 million of contract manufacturing sales, sales were up slightly compared to Q1 2023. Favorable pricing and currency were partially offset by lower commercial vehicle sales in Europe.

Bendix Making Changes at Indiana Manufacturing Operation

Bendix said it is transforming its distribution center into a state-of-the-art facility and consolidating dampers manufacturing into a single, larger space.

Doleco Announces Facility Expansion in Charlotte

The 33,000-square-foot facility is strategically positioned near major transportation hubs, providing optimal access to raw materials and speeding shipment of finished goods to all U.S. markets.

Standard Motor Products Introduces 268 New Numbers

The release provides new coverage in 75 product categories and 80 part numbers for 2023 and 2024 model-year vehicles, SMP said.

MAHLE Releases 2023 Sustainability Report

MAHLE noted it made significant progress in reducing its CO2 emissions, and increasing the use of renewable electricity.

MAHLE Releases 2023 Sustainability Report

Other Posts

Rotating Electrical: Revolving and Evolving

Higher compression ratios, increased accessory electrical loads, and the move toward hybridization and emissions compliance have brought many changes to the design and requirements of these rotating electrical components.

Rotating Electrical: Revolving and Evolving
The Purge: Flushing & Filling the Coolant

This job isn’t needed as often as it used to be, but it’s still important.

The Purge Flushing & Filling the Coolant
Transtar Industries Continues Rapid Product Line Expansion 

The company is now offering OE recycled engines, in addition to its expansive line of OE recycled transmissions and transfer cases.

ZF Cleans Up Metro Park for Earth Day

ZF said the effort was in line with its dedication to sustainability, zero-waste and circularity.

ZF Cleans up Metro Park