Michelin, GM Take The Air Out Of Tires For Passenger Vehicles

Michelin, GM Take The Air Out Of Tires For Passenger Vehicles

Michelin and General Motors presented a new generation of airless wheel technology for passenger vehicles — the MICHELIN Uptis Prototype (or "Unique Puncture-proof Tire System") — at the Movin'On Summit for sustainable mobility.

Michelin and General Motors presented a new generation of airless wheel technology for passenger vehicles — the MICHELIN Uptis Prototype (or “Unique Puncture-proof Tire System”) — at the Movin’On Summit for sustainable mobility.

Michelin and GM also announced a joint research agreement under which the companies intend to validate the Uptis Prototype with the goal of introducing Uptis on passenger models as early as 2024.

Because Uptis is airless, the breakthrough wheel assembly eliminates the dangerous risk of flat tires and blowouts. Benefits include:

·     Drivers of passenger vehicles feel safer on the road;

·     Operators of passenger vehicle fleets minimize downtime and improve efficiency resulting from flat tires and near-zero levels of maintenance; and

·     Society at large benefits from extraordinary environmental savings through reduced use of raw materials for replacement tire or spare tire production.

The Uptis Prototype represents a major advancement toward achieving Michelin’s VISION concept, which was presented at the Movin’On Summit in 2017 as an illustration of Michelin’s strategy for research and development in sustainable mobility. The VISION concept introduced four main pillars of innovation: airless, connected, 3-D printed and 100% sustainable (entirely renewable or bio-sourced materials). 

“Uptis demonstrates that Michelin’s vision for a future of sustainable mobility is clearly an achievable dream,” said Florent Menegaux, CEO for Michelin Group. “Through work with strategic partners like GM, who share our ambitions for transforming mobility, we can seize the future today.” 

“General Motors is excited about the possibilities that Uptis presents, and we are thrilled to collaborate with Michelin on this breakthrough technology,” said Steve Kiefer, senior vice president, global purchasing and supply chain, General Motors. “Uptis is an ideal fit for propelling the automotive industry into the future and a great example of how our customers benefit when we collaborate and innovate with our supplier partners.”

The Uptis Prototype is re-engineered for today’s passenger vehicles, and it also is well-suited to emerging forms of mobility, according to the two companies. The vehicles and fleets of tomorrow — whether autonomous, all-electric, shared service or other applications — will demand near-zero maintenance from the tire to maximize their operating capabilities.

“The Uptis Prototype demonstrates Michelin’s capacity for innovation — in both the mastery of these high-tech materials, and also the development approach in close collaboration with GM, which validates our Vision concept as a roadmap for innovation,” said Eric Vinesse, executive vice president, research and development, Group Michelin, who revealed Uptis at the Movin’On Summit. “Uptis represents progress toward Michelin’s vision for tomorrow’s mobility, and also embodies our commitment to a better, sustainable mobility for all.”

Uptis features ground-breaking improvements in architecture and composite materials, which enable Uptis to bear the car’s weight at road-going speeds, said the company.

These innovations combine to eliminate compressed air to support the vehicle’s load, resulting in extroardinary environmental savings. Approximately 200 million tires worldwide are scrapped prematurely every year as a result of punctures, damage from road hazards or improper air pressure that causes uneven wear. 

You May Also Like

Rotary’s New XA12 Alignment Scissor Lift

Shops can offer alignment services with bay space to spare, and techs can perform alignments on a wider range of vehicles.

Rotary, part of Vehicle Service Group (VSG) and Dover, today announced the addition of the new XA12 Alignment Scissor Lift to its extensive line of automotive lifts for independent shop owners, dealership service departments and car enthusiasts.

The XA12 serves as the ideal small bay alignment lift solution with the largest 4-wheel alignment wheelbase range available in its class. With a 78- to 164-inch 4-wheel alignment wheelbase range and 12,000-pound lifting capacity, the XA12 is designed with space and flexibility in mind. Shops can offer alignment services with bay space to spare, and technicians can perform alignments on a wider range of vehicles.

GRI Receives US DOT Certification For Safety

GRI tires will now incorporate the DOT code emboss on its side walls.

Mevotech Adds 2,300+ New Original Grade Part Numbers

Highlights from the new Original Grade release include control arms and ball joints.

TCCI Manufacturing Unveils High-Voltage Electric Compressor

The 850V compressor, unveiled at MACS 2023, is available in 34cc/46cc/60cc/120cc.

BBB Industries Releases 28 Remy New Part Numbers 

The new part numbers cover more than 9.3 million vehicles.

Other Posts

Magna’s ClearView Vision System Comes to Market on Ram Truck

The product combines interior and exterior mirrors, cameras, electronics and software.

Bridgestone Partners with Lamborghini on Supercar Run-Flat

Bridgestone says the Dueler All-Terrain AT002 is the first supercar all-terrain tire featuring run-flat technology.

Dayco Launches Electrically Controlled Water Pump Line

The new technology addresses a higher-than-normal failure rate with the OE pumps.

Engine Pro Honors S.A. Gear with Performance Award

S.A. Gear was recognized with a Fulfillment and Accuracy Award during Engine Pro’s annual supplier meeting.