Myers Industries Reports 2008 Fourth Quarter and Full Year Results - aftermarketNews

Myers Industries Reports 2008 Fourth Quarter and Full Year Results

Company reports net sales of $189.9 million for the fourth quarter and $867.8 million for the year, compared to $232.8 million and $918.8 million, respectively, for the same periods in 2007.

AKRON, Ohio — Myers Industries has reported results for the fourth quarter and year ended Dec. 31, 2008.

The company reported a loss of $59.1 million or $1.68 per share in the fourth quarter and a loss of $46.2 million or $1.31 per share for the year. This compares to income, including special items, of $18.2 million or 52 cents per share in the fourth quarter of 2007 and $36.9 million or $1.05 per share for the year. Results for 2008 include a non-cash goodwill impairment charge of $60.1 million and special pre-tax expenses of $18.1 million detailed below.

Excluding the impairment charge and special expenses, income, net of taxes, was $1.3 million or 4 cents per share in the fourth quarter and $18.7 million or 53 cents per share for the year. This compares to income, net of taxes and excluding special items, of $2.8 million or 8 cents per share in the fourth quarter of 2007 and $31.9 million or 91 cents per share for the year.

Strong cash flow from operations of approximately $60 million.

President and Chief Executive Officer John Orr said, “Despite the severe economic downturn and decline in demand during the fourth quarter, we are reporting positive operating results, exclusive of special items, for both the fourth quarter and full year. I am proud that our employees remained focused all year on initiatives we could control, such as product pricing, reducing expenses, developing new channels for growth and maximizing cash flow. Our actions will enable us to emerge stronger and to capitalize on new business and pent-up opportunities when the economy begins recovery.”

Net sales for the fourth quarter of 2008 were $189.9 million compared to $232.8 million in the fourth quarter of 2007. For the full year, net sales were $867.8 million compared to $918.8 million in 2007. The impact of higher selling prices, totaling approximately $38 million in 2008, enabled the company to recover most of its costs from record-setting raw material prices. Selling prices could not, however, fully offset the higher raw material costs and dramatic decline in volume due to the rapid economic deterioration and weakness in company’s markets in the second half of 2008.

Gross profit as a percent of sales was 24.1 percent in the fourth quarter of 2008 compared to 22.5 percent in the fourth quarter of 2007. Positive selling price momentum coming into the fourth quarter helped to mitigate the impact of raw material cost inflation, weakening demand and lower manufacturing volumes in the quarter. Gross profit as a percent of sales was 23.4 percent for the full year compared to 25.6 percent in 2007, reflecting the negative impact of higher raw material costs and lower volumes on manufacturing absorption.

The company reported a loss from continuing operations for the 2008 fourth quarter and full year of $59.1 million and $46.2 million, or $1.68 and $1.31 per share, respectively. This is compared to income from continuing operations of $18.2 million and $36.9 million, or 52 cents and $1.05 per share, respectively, for the 2007 fourth quarter and full year. Both years include special pre-tax items.

Prices for raw materials used in the company’s manufacturing operations, primarily high-density polyethylene (HDPE) and polypropylene (PP) plastic resins, reached record highs in 2008. For the nine-months ended Sept. 30, 2008, raw material prices were approximately 33 percent higher on average compared to 2007. As economic conditions worsened during the fourth quarter, prices for raw materials softened, but year-over-year prices remained approximately 20 percent higher on average.

Throughout 2008, the company focused on product pricing actions required to recover the costs from unprecedented raw material price inflation, which began in 2007.

Operating cash flow was approximately $60 million for year ended Dec. 31, 2008. This enabled the company to increase and maintain dividend payments in 2008 to provide returns to shareholders, and fund strategic capital expenditures without increasing debt.

Cash dividends paid in 2008 were $18.3 million, including a special payment of 28 cents per share in connection with termination of the company’s proposed merger. The regular quarterly cash dividend was increased 14 percent to 6 cents per share beginning with the January 2008 payment.

Capital expenditures were approximately $41 million in 2008 compared to $20 million in 2007. The 2008 expenditures exceeded the company’s projection of $20 to $25 million due to opportunistic investments made for technology to fuel new product development and productivity savings.

Total debt was $171.6 million at year-end, essentially unchanged from $170.9 million at Dec. 31, 2007. At Dec. 31, 2008, the company had a strong financial position with more than $185 million of available borrowing under its $250 million credit agreement, which expires in October 2011. The company remains in compliance with all of its debt covenants, and management believes cash flow from operations and available credit facilities will be sufficient to meet expected business requirements in 2009.

Income before taxes in the fourth quarter and through the full year of 2008 was negatively impacted by progressively lower demand and unit volumes. Higher selling prices, combined with internal and external cost reduction measures, did not offset these factors.

Income before taxes in the fourth quarter of 2008 was lower due to a sharp decline in end market demand and the resulting lower unit volumes for both tire service supplies and equipment. For the full year, benefits from favorable product mix and expense controls did not offset lower volumes.

While current economic conditions for the foreseeable future will remain challenging, the company will continue to focus on strengthening niche-market positions; improving manufacturing and distribution structure to reduce costs and increase productivity; and capitalizing on opportunities for sustainable, profitable growth.

The company continues to review its business segments for operational improvement opportunities, particularly in the Automotive and Custom Segment to determine long-term growth objectives. In addition, workforce and expense reductions have been implemented, including a company-wide freeze on wages, merit increases and hiring. Management believes these are essential actions in the best interest of the company and shareholders given the recessionary operating climate.

Orr concluded, “As a direct result of our transformation actions implemented over the past three years, Myers Industries is better prepared to weather future challenges. In 2009, we will remain vigilant for long-term growth and competitive positioning opportunities, while taking advantage of every instance to decrease costs and maximize cash flow. We are confident that, as demand in our end markets improves and the economy rebounds, we will emerge in an even stronger growth position.”

You May Also Like

ZF Aftermarket Releases 36 New Parts for US, Canada

ZF has introduced a total of 185 new products in 2024 under the ZF, LEMFÖRDER, SACHS, TRW and WABCO brands.

ZF Aftermarket announced it launched 36 new part numbers for a variety of braking, suspension and transmission components for passenger cars in the United States and Canda (USC) aftermarket. This includes 10 new part numbers for SACHS Continuous Damping Control (CDC) shock absorbers, bringing the total number launched this year to 60.

Dana Expands Spicer ReadyShaft Assembly Coverage

The addition of more than 3,000 new part numbers brings Dana’s ReadyShaft program
to over 13,000 active SKUs.

Dana-Expands-Spicer-ReadyShaft-Assembly-Coverage
Litens Aftermarket North America Elevates Sustainability Efforts

Litens said it is dedicated to achieving carbon neutrality by 2030. 

Litens Aftermarket North America Elevates Sustainability Efforts
HELLA Introduces HELLA BLADE LED 6” Series Auxiliary Lights

The HELLA BLADE Series combines powerful illumination with innovative features for the ultimate driving experience, the company said.

HELLA-BLADE-LED-6-Series-Auxiliary-Lights
Transtar Announces Agreement for Axalta to Acquire The CoverFlexx Group

Axalta Coating Systems has signed a definitive agreement to acquire Transtar Holding Company’s subsidiary The CoverFlexx Group.

Transtar-logo-on-white

Other Posts

Bendix: Air Disc Brake Production has Doubled Since 2018

Commercial ADB adoption rates in Class 6-8 vehicles are now up over 50%, according to Bendix.

Bendix Bowling Green
MPA: ‘We’re as Strong as Ever’

Chairman, President and CEO Selwyn Joffe discusses what he’d like the aftermarket to know about Motorcar Parts of America.

MPAs-Selwyn-Joffe-Were-as-Strong-as-Ever
Dayton Parts Offers New Aftermarket Products

A new DPF differential pressure sensor, engine oil dipsticks and fuel injector wiring harnesses designed to match OEM spec.

Dayton-parts-releases-2-sensor-dipstick-harnesses-1400
Hunter Engineering Releases Alignment Coverage for Hundreds of Vehicles

The release covers brand-new records – those not yet in existence at the time of the previous release – as well as updates to existing records, covering OEM changes to existing vehicles, the company said.

Hunter Engineering Releases Alignment Coverage for Hundreds of Vehicles