TIA Says Proposed TPMS Ruling May Not Improve Safety - aftermarketNews

TIA Says Proposed TPMS Ruling May Not Improve Safety

In response to recently proposed rulemaking by the National Highway Traffic Safety Administration (NHTSA) regarding tire pressure monitoring systems (TPMS) on passenger vehicles and light trucks, The Tire Industry Association (TIA) issued a release noting “serious concerns” about the proposal’s effect on safety.

From Tire Review Staff & Wire Reports

WASHINGTON — In response to recently proposed rulemaking by the National Highway Traffic Safety Administration (NHTSA) regarding tire pressure monitoring systems (TPMS) on passenger vehicles and light trucks, The Tire Industry Association (TIA) issued a release noting “serious concerns” about the proposal’s effect on safety.

Under the proposed rulemaking, new vehicles must be equipped with a system capable of detecting any tire that is inflated 25 percent below the vehicle manufacturer’s recommended inflation pressure.

“The recently proposed federal regulation does not fulfill the requirement of improving safety for motorists,” said TIA in its statement. “We have serious concerns about the threshold where the system would notify the driver of an underinflated tire,” said Roy Littlefield, executive vice president of TIA.

“For example,” he continued, “a car with a gross axle weight rating (GAWR) of 1,885 lbs on the front axle has a recommended cold inflation pressure of 32 psi, which can support 1,058 lbs per tire. If the 25 percent threshold is used, the resulting air pressure is 24 psi, so the carrying capacity of the tire will be less than 900 lbs per tire, thereby creating a potentially overloaded assembly. If a 20 percent threshold is used, the resulting air pressure is 26 psi, so the tire can support a load of 959 lbs. In this instance, a system that enacts at 20 percent would notify the driver that a potentially unsafe condition is about to occur. However, as soon as the inflation pressure drops below 26 psi, the tire can no longer support the GAWR, or the maximum weight on the front axle. If the new proposed threshold of 25 percent is adopted, the driver could be driving on an overloaded tire for a significant period of time.”

TIA additionally asserts that drivers of vehicles equipped with TPMSs will naturally have an improved sense of security as long as the sensors do not indicate an underinflated tire. “The question is whether or not it should enact before or after the unsafe condition occurs,” said TIA. “The concept of reserve load must also be resolved, and the current proposal does not adequately address the issue,” the organization noted.

“Given the serious concerns over the threshold where the system notifies the driver and the lack of current information on the importance of reserve load, we feel that the current proposal does not take all of the factors into consideration and will still result in vehicles being operated with tires that cannot support the load,” Littlefield concluded.

_______________________________________

Click here to view the rest of today’s headlines.

You May Also Like

PHINIA Reports Q1 2024 Results

U.S. GAAP net sales were $863 million, an increase of 3.4% compared with Q1 2023, according to PHINIA.

PHINIA Inc. reported results for the first quarter ended March 31, 2024.

First Quarter Highlights:

U.S. GAAP net sales of $863 million, an increase of 3.4% compared with Q1 2023.

Excluding $17 million of contract manufacturing sales, sales were up slightly compared to Q1 2023. Favorable pricing and currency were partially offset by lower commercial vehicle sales in Europe.

Bendix Making Changes at Indiana Manufacturing Operation

Bendix said it is transforming its distribution center into a state-of-the-art facility and consolidating dampers manufacturing into a single, larger space.

Doleco Announces Facility Expansion in Charlotte

The 33,000-square-foot facility is strategically positioned near major transportation hubs, providing optimal access to raw materials and speeding shipment of finished goods to all U.S. markets.

Standard Motor Products Introduces 268 New Numbers

The release provides new coverage in 75 product categories and 80 part numbers for 2023 and 2024 model-year vehicles, SMP said.

MAHLE Releases 2023 Sustainability Report

MAHLE noted it made significant progress in reducing its CO2 emissions, and increasing the use of renewable electricity.

MAHLE Releases 2023 Sustainability Report

Other Posts

Transtar Industries Continues Rapid Product Line Expansion 

The company is now offering OE recycled engines, in addition to its expansive line of OE recycled transmissions and transfer cases.

ZF Cleans Up Metro Park for Earth Day

ZF said the effort was in line with its dedication to sustainability, zero-waste and circularity.

ZF Cleans up Metro Park
PRT Launches 30 New Complete Strut Assemblies

The new items represent more than 10 million vehicles in new coverage, PRT said.

Motorcar Parts of America’s Selwyn Joffe on Core Values

Sustainability is embedded in every facet of the company’s operations, Joffe affirmed.

Motorcar Parts of America's Selwyn Joffe on Core Values