Standard Motor Products Announces Fourth Quarter, Year-End 2014 Results - aftermarketNews

Standard Motor Products Announces Fourth Quarter, Year-End 2014 Results

NEW YORK – Standard Motor Products (SMP) has reported its consolidated financial results for the three months and for the year ended Dec. 31, 2014.

Consolidated net sales for the fourth quarter of 2014 were $218.1 million, compared to consolidated net sales of $218.7 million during the comparable quarter in 2013. Earnings from continuing operations for the fourth quarter of 2014 were $11.5 million or 50 cents per diluted share, compared to $9.4 million or 40 cents per diluted share in the fourth quarter of 2013.

Consolidated net sales for 2014 were $980.4 million, compared to consolidated net sales of $983.7 million in 2013. Earnings from continuing operations for 2014 were $52.9 million or $2.28 per diluted share, compared to $53 million or $2.28 per diluted share in 2013.

SMP Chairman and CEO Lawrence Sills stated, “We are pleased with our fourth quarter results. To begin with, our sales equaled a very strong quarter from a year ago. Engine Management, for example, had a 14 percent increase in the fourth quarter of 2013, above our normal growth pattern, and we matched the same sales figure this year. At the same time, we had improvements in gross margin and operating profit, leading to a 16.7 percent increase in diluted earnings per share, excluding special items, for the quarter, from 42 cents to 49 cents.

“For the full year, despite disappointing sales, we achieved an 8.6 percent increase in diluted earnings per share, excluding special items. Sales were slightly below 2013, and below our forecast of low- to mid-single digit annual growth. A major contributing factor was the second cool summer in a row, which led to lower Temperature Control volume. However, as a result of continued improvement in manufacturing, purchasing and expense control, our diluted earnings per share, excluding special items, increased from $2.32 to $2.52, which is an all-time record for our company.

“We made three acquisitions early in 2014 — Pensacola Fuel Injectors, a rebuilder of diesel fuel injectors; Annex Manufacturing, an importer and distributor of Temperature Control products; and the creation of a 50/50 joint venture with Gwo Yng, a leading Chinese manufacturer of Temperature Control products.  All three are now fully integrated into our company, and we look forward to achieving additional benefits in 2015.

“Several weeks ago, we announced the appointment of Eric Sills as president of the company. His previous position was vice president global operations, where he was responsible for all manufacturing, distribution, engineering and supply chain management, both in the U.S. and worldwide. We are confident that Eric’s skill, experience and knowledge of the industry makes him an ideal candidate to help lead the company into the future.

“Finally, on Feb. 2, we announced an increase in our quarterly dividend from 13 cents to 15 cents, reflecting our confidence in the company’s future. We are pleased that we can continue to return value to our shareholders.”

SMP’s board of directors has authorized the purchase of up to an additional $10 million of its common stock under a stock repurchase program. This increase is in addition to the completed $10 million repurchase program authorized by the board in February 2014. The company intends to fund the stock repurchase program through its revolving credit facility. Any repurchased shares will be held as treasury stock and will be available for general corporate purposes, including funding existing equity compensation plans.

You May Also Like

ZF Aftermarket Releases 36 New Parts for US, Canada

ZF has introduced a total of 185 new products in 2024 under the ZF, LEMFÖRDER, SACHS, TRW and WABCO brands.

ZF Aftermarket announced it launched 36 new part numbers for a variety of braking, suspension and transmission components for passenger cars in the United States and Canda (USC) aftermarket. This includes 10 new part numbers for SACHS Continuous Damping Control (CDC) shock absorbers, bringing the total number launched this year to 60.

Dana Expands Spicer ReadyShaft Assembly Coverage

The addition of more than 3,000 new part numbers brings Dana’s ReadyShaft program
to over 13,000 active SKUs.

Dana-Expands-Spicer-ReadyShaft-Assembly-Coverage
Litens Aftermarket North America Elevates Sustainability Efforts

Litens said it is dedicated to achieving carbon neutrality by 2030. 

Litens Aftermarket North America Elevates Sustainability Efforts
HELLA Introduces HELLA BLADE LED 6” Series Auxiliary Lights

The HELLA BLADE Series combines powerful illumination with innovative features for the ultimate driving experience, the company said.

HELLA-BLADE-LED-6-Series-Auxiliary-Lights
Transtar Announces Agreement for Axalta to Acquire The CoverFlexx Group

Axalta Coating Systems has signed a definitive agreement to acquire Transtar Holding Company’s subsidiary The CoverFlexx Group.

Transtar-logo-on-white

Other Posts

Bendix: Air Disc Brake Production has Doubled Since 2018

Commercial ADB adoption rates in Class 6-8 vehicles are now up over 50%, according to Bendix.

Bendix Bowling Green
MPA: ‘We’re as Strong as Ever’

Chairman, President and CEO Selwyn Joffe discusses what he’d like the aftermarket to know about Motorcar Parts of America.

MPAs-Selwyn-Joffe-Were-as-Strong-as-Ever
Dayton Parts Offers New Aftermarket Products

A new DPF differential pressure sensor, engine oil dipsticks and fuel injector wiring harnesses designed to match OEM spec.

Dayton-parts-releases-2-sensor-dipstick-harnesses-1400
Hunter Engineering Releases Alignment Coverage for Hundreds of Vehicles

The release covers brand-new records – those not yet in existence at the time of the previous release – as well as updates to existing records, covering OEM changes to existing vehicles, the company said.

Hunter Engineering Releases Alignment Coverage for Hundreds of Vehicles