Making The Case For Preventative Water Pump Replacement - aftermarketNews

Making The Case For Preventative Water Pump Replacement

Sponsored by GMB North America, Inc.

gmb-logo-300x72If a water pump isn’t showing signs of a leak, corrosion, cracks, making noise, or exhibiting any other “red flags,” should it be replaced? Most people would say no – it only makes sense to replace a part after it breaks.

But, in the case of water pumps, premature replacement can be pretty smart. Because removing and replacing a water pump is labor intensive – and because the cost of a quality replacement is surprisingly affordable – a case can be made for replacing a water pump before it breaks.

It’s All About Saving Money
The main – and best – reason for anyone to replace a water pump prematurely is financial:

  • On many vehicles, removing and replacing a water pump is a half day of labor (perhaps more), resulting in a final repair bill that can top $1,000
  • If the water pump is replaced during routine maintenance (e.g., replacing the water pump when the timing belt is changed), the labor cost is practically zero
  • Replacement pumps are surprisingly affordable, with quality options available for the price of a set of spark plugs

Most importantly, if/when a water pump fails, the risk of engine, radiator, and/or fan damage is significant. A sudden, catastrophic water pump failure can lead to thousands of dollars in subsequent damage. While these types of failures are rare, they do happen.

Basically, if you can replace a water pump during the course of normal maintenance, it’s probably worth doing. A new water pump is a fraction of the cost of replacing a broken pump, especially if water pump failure leads to additional engine damage.

The Maintenance Factor
Water pumps work best when the vehicle owner follows recommended coolant replacement guidelines. But, if coolant isn’t replaced at the recommended interval, it can become very caustic. This will cause the cooling system to oxidize, resulting in premature failure of the water pump, impeller, shaft seal, and/or bearing.

If a car is used, and the current owner doesn’t know if the cooling system maintenance schedule was followed by the previous owner, a water pump replacement is prudent. Likewise, if a vehicle owner hasn’t observed the recommended maintenance schedule for their cooling system, water pump replacement should definitely be considered.

Fuel Savings and Noise Reduction
If a vehicle’s water pump is a few years old, odds are good the main water pump bearing has some wear. A worn bearing leads to an increase in friction, which results in a parasitic loss in engine efficiency. While the amount of the efficiency loss is small, it’s fair to say that replacing an older water pump can lead to a small increase in engine efficiency and fuel economy.

A new water pump can also reduce engine noise. Again, older pumps likely have a bearing with some wear and tear. This wear can cause the water pump to make a grinding or whining noise. While the noise isn’t usually loud by itself, it contributes to the noise that’s already under the hood. For car owners that appreciate a little peace and quiet, replacing an older water pump could be a nice improvement.

Summing Up
Preventative water pump replacement is prudent and logical. While replacing a part that isn’t broken might strike some as unnecessary, it’s important to compare it to the cost of replacing a failed water pump.

* Written and submitted by GMB North America Inc., a global manufacturer of automotive products, including water pumps.

You May Also Like

Protecting Your Vehicle in the Winter

Depending on where you live, autumn is an idyllic time of year with bright colors and mild temperatures.  If there is one downside though, it means that winter is on its way, which means frigid temperatures, snow, ice and difficult road conditions. The lifespans of cars and trucks are increasing all the time, so protecting

Depending on where you live, autumn is an idyllic time of year with bright colors and mild temperatures. 

If there is one downside though, it means that winter is on its way, which means frigid temperatures, snow, ice and difficult road conditions. The lifespans of cars and trucks are increasing all the time, so protecting your customers’ vehicles from the harsh weather is even more important to keeping that trend alive. 

What Causes Fuel Pumps to Fail?

Like most vehicle components, natural wear and tear is the unavoidable cause for parts replacement.  Fuel pumps are often out of sight and out of mind for most shop visitors. That’s because they are an as-needed repair and not typically a part of ongoing maintenance. Nevertheless, if you diagnose fuel pump failure, customers will want


The automotive industry is evolving at a rapid pace, consistently under pressure to cater to customer preferences and determine how to deliver final products at a time when demand is high and inventory cannot keep up. After years of manufacturing shutdowns, limited numbers of employees, and delays up and down the supply chain, automotive manufacturers

Helping Customers Understand the Signs of Fuel Pump Failure

Fuel pump failures are never a one-size-fits-all diagnosis.  Different symptoms indicate different problems and often, the pump will still function—albeit erratically—as it fails. Explaining this to customers isn’t always easy, especially because many of them may not know that the fuel pump has more than one role. Shop owners and technicians can help customers understand

Updating Your Shop’s Approach to Vehicle Filtration 

Customers may wonder what the biggest threats are to their engines.  Heat is one for sure. But the other are tiny – often microscopic – particles. If these aren’t filtered thoroughly, they will accumulate inside the engine, which will increase friction, heat and lead to significant damage to internal engine components. In time, it will

Other Posts

Why OE Spark Plugs May Not Always Be the Best Option

The plug-in-the-hole method of spark plug replacement is dependable, but does that mean it’s the best choice for today’s vehicles? When it comes to replacing spark plugs, many follow the conventional wisdom which dictates they would choose the same type of plug that came with the vehicle – or at least the same as the

New Monobloc OE CV Axle Technology Greatly Reduces NVH

Today’s vehicle drivetrain systems are far more complex and powerful than ever before. So, you want to make sure you choose a replacement axle that matches the original OE design attributes to ensure proper performance and durability. Avoid installing an inferior axle based on price only, that may not perform properly or worse yet, fail

Warn Your Customers About Water Pump Failure During the Summer

Summer is an opportune time for automotive professionals to remind customers to keep an eye on the signs of a failing water pump. As you know, extreme summer temperatures and added strain on vehicles from activities like long road trips can cause engines to become more susceptible to troubles from excessive heat, making the function

Going the Extra Mile(s) with Iridium Spark Plugs

Advanced spark plugs designed to improve fuel efficiency in today’s engines Helping customers choose the right spark plugs is more important than ever. When it comes to late model vehicles in particular, shop owners and technicians understand that improvements in spark plug design, metallurgy and technology can help maximize the performance and fuel efficiency of