How to Explain Fuel Pump Failure to a Customer - aftermarketNews

How to Explain Fuel Pump Failure to a Customer

Sponsored by GMB North America, Inc.

For those who aren’t mechanically inclined, fuel pumps can be mysterious. When many consumers hear the phrase “your fuel pump requires replacement,” a confused and frightened stare is often the response. Throw in a measure of skepticism, and consumers will often refuse a replacement fuel pump against their own interest.

Shops and technicians that have faced this scenario will usually try to explain a fuel pump’s function and failure modes to the consumer. This can be challenging. Here are some strategies for explaining a fuel pump failure to consumers.

First, Address The Biggest Source of Skepticism
Consumers often tend to think of part function in a binary manner – either a part is working, or it isn’t. This is a simplistic – but completely understandable – point of view.

Of course, in the case of fuel pumps, a failing pump often has partial functionality. Depending on the type of pump failure, it’s possible for a pump to operate at less-than optimal capacity for an extended period. Many consumers might not believe that a fuel pump has failed if their car starts and operates as expected, at least until they do “X.”

So, before diving into any explanation, it’s a good idea to explain that fuel pump failures are “tricky.” The consumer should understand that the fuel pump’s job is to do more than just pump fuel into the engine – it also needs to maintain a specific fuel system pressure. Be sure to explain that at lower RPMs, a crippled or damaged fuel pump can often seem fine. Without this explanation, the consumer’s skepticism might cloud their thinking.

Wear On the Pump
The most common reason a pump fails is wear on the pump from improper lubrication or over-use. The best way to explain a failed fuel pump due to wear and tear is to explain what other reasons may have lead to a failed pump:

  • Most fuel pumps are lubricated by the fuel in the tank itself. If the consumer operates their vehicle at a low fuel tank level on a regular basis, that can lead to lubrication issues and premature wear
  • A failing oxygen sensor is another common cause of premature failure. If the sensor is reading false oxygen levels, it can cause the fuel pump to work harder than anticipated for an extended period. This, in turn, puts more stress on the pump. Many vehicle owners ignore O2 sensor warnings because of bad advice they’ve found online (or even from a well-meaning technician), and suffer a fuel pump failure a short time later.

When explaining these possible causes, it’s wise to speak in a neutral tone and offer a clinical, blame-free explanation. It’s also a good idea to suggest consumers keep their fuel tank level above a quarter of a tank for proper pump lubrication to maximize the life of their replacement fuel pump.

Corrosion of Components
Pump components can corrode, especially if the vehicle sits for long periods of time. This is doubly true if ethanol is present in the fuel.

The corrosion process starts with a little bit of moisture in the fuel in the tank. This water can cause rust to form on any part of a fuel pump that is not fully submerged in fuel, plates, rivets, wires, sensor rods, etc. This rust then flakes off into the fuel supply, clogging and/or damaging the pump mechanism. Ethanol can accelerate this process as it can form an acid under the right conditions.

Contaminated fuel is another source of corrosion and contamination. If the consumer purchases fuel from a filling station that has a contamination problem in their underground fuel tanks, the fuel pump can be the first part to fail.

If a consumer has to leave their vehicle sitting for an extended period, be sure to recommend adding fuel stabilizer to their gas tank. If not, be sure to talk to them about where they buy their fuel.

Electrical Fault
Last but not least, electrical faults and circuit failures can lead to a pump failure. These faults and failures can happen for a variety of reasons, and explaining them to the customer can be complicated.

If details are warranted, share them with the customer. Since these faults may not actually require pump replacement, merely some diagnostics and wiring/clip repair, they can be the easiest to explain without argument from the customer about costs.

It might also be a good idea to reiterate that fuel pumps can fail partially and cause all sorts of problems (stalling or hesitation, poor acceleration) without failing completely.

Conclude With Some Fuel Pump Advice
After explaining the failure of the fuel pump to the consumer, it’s a good idea to talk to them about best practices for maximizing pump lifespan:

  • Try not to let the fuel level fall below a quarter of a tank, as that can cause the fuel pump to overheat
  • Do not let the vehicle sit unused for more than a few weeks without adding stabilizer to the fuel tank
  • Try to buy fuel from a busy filling station – that reduces the odds of getting a “bad” tank of fuel
  • Be sure to think of the fuel pump as part of a really big system…if there’s a problem with a bad oxygen sensor, for example, that can cause the pump to fail

Hopefully, with the right approach, a consumer will both approve the repair and walk away with more trust in your expertise and your shop.

You May Also Like

Protecting Your Vehicle in the Winter

Depending on where you live, autumn is an idyllic time of year with bright colors and mild temperatures.  If there is one downside though, it means that winter is on its way, which means frigid temperatures, snow, ice and difficult road conditions. The lifespans of cars and trucks are increasing all the time, so protecting

Depending on where you live, autumn is an idyllic time of year with bright colors and mild temperatures. 

If there is one downside though, it means that winter is on its way, which means frigid temperatures, snow, ice and difficult road conditions. The lifespans of cars and trucks are increasing all the time, so protecting your customers’ vehicles from the harsh weather is even more important to keeping that trend alive. 

What Causes Fuel Pumps to Fail?

Like most vehicle components, natural wear and tear is the unavoidable cause for parts replacement.  Fuel pumps are often out of sight and out of mind for most shop visitors. That’s because they are an as-needed repair and not typically a part of ongoing maintenance. Nevertheless, if you diagnose fuel pump failure, customers will want


The automotive industry is evolving at a rapid pace, consistently under pressure to cater to customer preferences and determine how to deliver final products at a time when demand is high and inventory cannot keep up. After years of manufacturing shutdowns, limited numbers of employees, and delays up and down the supply chain, automotive manufacturers

Helping Customers Understand the Signs of Fuel Pump Failure

Fuel pump failures are never a one-size-fits-all diagnosis.  Different symptoms indicate different problems and often, the pump will still function—albeit erratically—as it fails. Explaining this to customers isn’t always easy, especially because many of them may not know that the fuel pump has more than one role. Shop owners and technicians can help customers understand

Updating Your Shop’s Approach to Vehicle Filtration 

Customers may wonder what the biggest threats are to their engines.  Heat is one for sure. But the other are tiny – often microscopic – particles. If these aren’t filtered thoroughly, they will accumulate inside the engine, which will increase friction, heat and lead to significant damage to internal engine components. In time, it will

Other Posts

Why OE Spark Plugs May Not Always Be the Best Option

The plug-in-the-hole method of spark plug replacement is dependable, but does that mean it’s the best choice for today’s vehicles? When it comes to replacing spark plugs, many follow the conventional wisdom which dictates they would choose the same type of plug that came with the vehicle – or at least the same as the

New Monobloc OE CV Axle Technology Greatly Reduces NVH

Today’s vehicle drivetrain systems are far more complex and powerful than ever before. So, you want to make sure you choose a replacement axle that matches the original OE design attributes to ensure proper performance and durability. Avoid installing an inferior axle based on price only, that may not perform properly or worse yet, fail

Warn Your Customers About Water Pump Failure During the Summer

Summer is an opportune time for automotive professionals to remind customers to keep an eye on the signs of a failing water pump. As you know, extreme summer temperatures and added strain on vehicles from activities like long road trips can cause engines to become more susceptible to troubles from excessive heat, making the function

Going the Extra Mile(s) with Iridium Spark Plugs

Advanced spark plugs designed to improve fuel efficiency in today’s engines Helping customers choose the right spark plugs is more important than ever. When it comes to late model vehicles in particular, shop owners and technicians understand that improvements in spark plug design, metallurgy and technology can help maximize the performance and fuel efficiency of