Connect with us

Manufacturing

Champion Oil Introduces 80% Ether Starting Fluid

The Professional Grade 80% Ether Starting Fluid is designed to work on gas and diesel engines in cold weather.

Advertisement

Champion Oil, a globally recognized industry leader in performance lubricants, additives, chemicals and motor oils for more than 65 years, recently announced a Professional Grade 80% Ether Starting Fluid that is designed to work on gas and diesel engines in cold weather.

Advertisement
Click Here to Read More
Advertisement

“Starting fluid is a volatile, flammable liquid which is used to aid the starting of internal combustion engines, especially during cold weather or in engines that are difficult to start using conventional starting procedures,” stated Karl Dedolph of Champion Brands, LLC. “It is typically available in an aerosol spray can, and may sometimes be used for starting direct injected diesel engines or lean burn spark engines running on alcohol fuel.

“Modern starting fluid products contain mostly volatile hydrocarbons such as heptane (the main component of natural gasoline) with varying portions of diethyl ether and carbon dioxide as the propellant helping start internal combustion engines because of its low 160 °C (320 °F) autoignition temperature.”  

“Starting fluid is sprayed into the engine intake near the air filter, or into the carburetor bore or a spark plug hole of an engine to get added fuel to the combustion cylinder quickly,” added Dedolph. “Using starting fluid to get the engine running faster avoids wear to starters and fatigue to one’s arm with pull start engines, especially on rarely used machines. 

“Other uses include cold weather starting, vehicles that run out of fuel and thus require extra time to restore fuel pressure, and sometimes with flooded engines. Mechanics sometimes use it to diagnose starting problems by determining whether the spark and ignition system of the vehicle is functioning; if the spark is adequate but the fuel delivery system is not, the engine will run until the starting fluid vapors are consumed.” 

Advertisement

“It is used more often with carbureted engines than with fuel injection   systems. Caution is required when using starting fluid with diesel engines that have preheat systems in the intake or glow-plugs installed, as the starting fluid may pre-ignite, leading to engine damage,” concluded Dedolph. 

Champion Professional Grade 80% Ether Starting Fluid works great on gas and diesel engines and allows faster starts and reduces wear on batteries. It contains upper cylinder lubricant for added protection. Use of personal protective equipment as required. Wash face, hands any exposed skin thoroughly after handling.

This product is compliant for sale in North America.

Advertisement

POPULAR POSTS

Events

2021 Keystone BIG Show Coming To Grapevine, Texas

New Tech

Goodyear Ventures Invests In Autonomous Delivery Provider

Distribution

Auto-Wares TechExpo Goes Virtual

Personnel

Dana Names New Senior Vice President Of Global Operations

Connect
aftermarketNews